Logo Elecsoft
Logo Elecsoft
Fagor Ederlan enhances its quality management with Visual Factory Calibre and SPC

Fagor Ederlan enhances its quality management with Visual Factory Calibre and SPC

by | May 13, 2026 | Calibre, Quality, SPC, Testimonial, Trust, Visual Factory

🏭 Fagor Ederlan, a benchmark in the automotive sector and a specialist in the manufacturing of high-precision metal components, is committed to digitalizing its quality processes with Visual Factory solutions.

The company uses Visual Factory Calibre and Visual Factory SPC as key tools to ensure traceability, process control, and efficiency in day-to-day management.

📍 We share the testimonial of Nerea Olaverri, Plant Engineering Manager at Fagor Ederlan Usurbil:

“Visual Factory Calibre allows us to keep all statuses and calibrations of our inspection equipment up to date. The improvements made to the software make management easier and generate automatic alerts so we can keep the system updated.

Visual Factory SPC is essential for our process control. It enables us to perform capability analysis, manage alarms in case of deviations, and integrate new controls while always maintaining the traceability required by IATF.

We have been using this software for 20 years and are very satisfied with Elecsoft’s service. They are responsive and allow us to implement specific modifications without difficulty.”

📊 This testimonial shows how the combination of Visual Factory Calibre and SPC makes it possible to maintain full control over equipment and processes, ensuring traceability, analytical capability, and a fast response to any deviation.

🔗 Discover how Visual Factory can help you optimize quality management in your organization: www.elecsoft.com

Troqueles Gaco strengthens its metrological management and statistical process control with Visual Factory Calibre and SPC

Troqueles Gaco strengthens its metrological management and statistical process control with Visual Factory Calibre and SPC

by | Feb 18, 2026 | Calibre, SPC, Testimonial, Visual Factory

🏭 Troqueles Gaco S.L., based in IrĂșn (Gipuzkoa), is a group of companies dedicated to the manufacturing of tooling and stamped parts for industry in general. With a solid track record and ISO 9001 certification since 1998, the company maintains a strong commitment to quality and continuous improvement.

📍 We share the testimonial of JesĂșs Corredor, Quality Manager at Troqueles Gaco S.L.:

“We have held ISO 9001 certification since 1998 and, for years prior to that, we have relied on Elecsoft’s support for the management of measurement and testing equipment, as well as for statistical process control.

In both cases, the application environment is user-friendly and easy to use; whenever we have had questions, the support received has always been outstanding—fast and effective.

When we needed to automate the recording of data collected with CMMs in the SPC application, the result was also excellent.

The applications are continuously being updated, incorporating the needs that arise from their clients.

In short, highly recommended.”

📊 The experience of Troqueles Gaco S.L. shows how the combination of Visual Factory Calibre and Visual Factory SPC makes it possible to optimize traceability, automate process control, and ensure the reliability of metrological data, consolidating a strong and sustainable quality culture.

🔗 Discover how Visual Factory solutions can help you digitize quality in your organization: www.elecsoft.com

Would you pass an audit tomorrow?

Would you pass an audit tomorrow?

by | Dec 3, 2025 | Calibre, Quality, SPC, Visual Factory

🔍 What if the audit were tomorrow?
📆 Are you ready
 or would you need a whole week to prepare everything?

With Visual Factory Calibre, SPC, and Quality, being ready doesn’t depend on last-minute stress.
Our solutions are designed to make compliance a natural part of your daily operations:

🔧 Visual Factory Calibre
✔ Automatic recording of calibrations and verifications
✔ Full traceability of standards and equipment
✔ Audited and secure document control

📊 Visual Factory SPC
✔ Statistical process control with real-time monitoring
✔ Automatic calculation of indices such as Cp, Cpk, Pp, and Ppk
✔ Configurable alerts to detect deviations in time

📁 Visual Factory Quality
✔ Quality project management in compliance with IATF 16949
✔ Tracking of FMEAs, control plans, and corrective actions
✔ Electronic signature, traceability, and advanced reporting

👉 The result? Faster audits, no improvisation, and total confidence.

🔗 Discover how Visual Factory can help you always stay audit-ready: www.elecsoft.com

#Elecsoft #VisualFactoryCalibre #VisualFactorySPC #VisualFactoryQuality #Audits #Traceability #IndustrialQuality #ISO9001 #IATF16949 #Industry40

TIP VF SPC #1. Cp, Cpk, Pp, Ppk? More than acronyms, they’re the key to trusting your process

TIP VF SPC #1. Cp, Cpk, Pp, Ppk? More than acronyms, they’re the key to trusting your process

by | Sep 26, 2025 | SPC, TIP, Visual Factory

Cp, Cpk, Pp, Ppk? More than acronyms, they’re the key to trusting your process 📊

Do you really know what these capability indices indicate?
Or do you calculate them
 without being clear on how to interpret them?

Capability indices are essential to know if your process:

✅ Is stable
 ✅ Is centered
 ✅ Meets customer tolerances
 ✅ And above all
 if it can be trusted

📊 In Visual Factory SPC we calculate these indices automatically, but the most important thing is understanding what they mean and how to use them.

🔗 That’s why we’re sharing this article from our blog, where we explain everything in detail with practical examples:

👉 Read the full article here: Cp, Cpk, Pp, and Ppk? More than acronyms, they’re the key to trusting your process.pdf

🎯 If your Cpk values seem low
 or if you don’t know when to use Ppk, this read is for you.

Visual Factory SPC: simplicity, agility, and compliance for the automotive industry

Visual Factory SPC: simplicity, agility, and compliance for the automotive industry

by | Sep 26, 2025 | SPC, Visual Factory

In an environment where time matters and errors are costly, statistical process control must be agile and useful right from the shop floor.

That’s why we created Visual Factory SPC, a solution that doesn’t overwhelm with complex calculations but focuses on what really matters:

đŸ”č Complying with automotive industry standards (such as IATF 16949)
 đŸ”č Enabling self-control directly from the workstation
 đŸ”č Allowing operators to input data without depending on technical staff
 đŸ”č Detecting and anticipating variations before they impact production

Quality shouldn’t be managed from the office, but where it’s actually produced.

👉 Discover how Visual Factory SPC can help you: www.elecsoft.com